Advantages Of PVC Edge Banding In Furniture Edge Banding

-
As we all know, furniture edge bands exist in many corners of our lives, we usually easily ignore it, but without it, life will always bring us a lot of trouble. As for the edge banding, in simple terms, it is the item that seals the cross-section of the table, cabinet and other board in daily life. It can effectively prevent the environment and the adverse factors (mainly moisture) in the use process from damaging the board and prevent the volatilization of formaldehyde inside the board, and at the same time achieve the effect of beautiful decoration.
Today I share the advantages of PVC edge banding in furniture edge banding.
One: PVC furniture edge banding is relatively light, which is relative to metal and organic glass. The reason for lightness is not because it is a polymer compound, but because they are organic compounds, that is, carbon, hydrogen, oxygen, and nitrogen. And other lighter elements.
Two: The material of PVC furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressing, and maintains its original shape after cooling or pressure disappears. It can be processed into various shapes of edge bands by extrusion, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shaped shapes, and so on.
Three: PVC furniture edge bands are of high quality and low price, and the price of plastic is not as large as that of metal.

评论

  1. Nancy2022年3月6日 22:46

    If you are interested in purchasing our low-temperature hot melt adhesive, please contact us https://api.whatsapp.com/send?phone=8613542501888, our official website: http://www.tyhori.com/

    回复删除

发表评论

此博客中的热门博文

Right after Between Hot Burn Adhesive and Solvent-Based Hot Melt Glue

-
图片
The most common hot melt adhesive is polyolefins. They are strong and durable. Resins create the very hot burn feel "wet. inch They provide the main bond among a couple of surfaces. Plasticizers customize viscosity and reduce application. Some involving these varieties are extra suitable for industrial uses than some others. Several are better suited for packaging, but will be often the most adaptable. To learn more about the distinctions between these supplies, read on. Hot melts are 100% solid formulations and don't lose thickness throughout the setting process. Whenever cooled, they get smaller minimally and happen to be ideal for filling gaps. Solvent-based adhesives rely around the solvent extracting to create. This specific commonly ends in some sort of 40 to 85 percent reduction throughout the applied weight. Fortunately they are a more expensive selection. Typically the key to selecting a warm melt is finding 1 that is right regarding your application. The most typical
阅读全文

PVC wood grain edge banding

-
图片
PVC wood grain edge banding Cured after printing with ink on a PVC substrate and roll coating with UV paint. Woodgrain edge b ands must show good simulation results in the quality of the ink. Using high-quality ink to print the edge band, the simulation effect of the edge band i s close to that of the board, the printing layer is rich, and the indoo r discoloration is not obvious within three years. At present, the edge bands with rich layering are mainly three-color printing, followed by two-color printing and one-co lor printing. Detection method:  Put the edge bands printed with different inks under strong sunlight for a week, and then compare with the sunlight before irradiation, you can see that the faded degr ees of the two edge bands are different. The abrasion resistance and transparen cy of wood grain edge strips are related to the quality of UV paint. If the surfa ce of the edge band is easily scratched or blurred, it is due to the use of poor quality UV paint. T
阅读全文